Model 3 (2017 - 2024+) and Tesla Model Y (2020 - 2026+)
UP-RW aka Road Warrior Curb Guard Replacement
INSTALLATION GUIDE
- Road Warrior Replacement Ring
Note: Failure to follow the following instructions may lead to accelerated wear, component failure, or even consequential damages. Improper installation of this product is not covered by our limited warranty. If you do understand any of the following procedures, please contact our support team at support@unpluggedperformance.com, or consult local experts in suspension services for further support.
- Rubbing Alcohol
- Microfiber Towel
- Plastic Pry Tool
By installing or using this product, you understand and agree with the following: If you do not agree, do not proceed with the installation and return this product within 30 days for a full refund of the purchase price from the company from which you have purchased it.
- I understand and agree that this product is intended to be installed for use on private roads and in jurisdictions where the use of this product is deemed legal by the local authorities. Furthermore, I understand and agree Unplugged Performance does not have any knowledge or control of regulations in my local jurisdiction, and it is up to me to determine if the product is acceptable for use with my vehicle.
- I understand that Unplugged Performance has done testing of this product on road and on closed racetracks but does not have the ability to test the vehicle for localized standards and regulations.
- I understand and agree that if the vehicle manufacturer determines that any Unplugged Performance products have contributed to a problem with the vehicle it may affect the vehicle’s warranty. Furthermore, I understand and agree that Unplugged Performance has no duty nor ability to be involved in internal manufacturer decisions.
- I understand and agree that if this product is given to an installer for installation on my vehicle, I have read and agreed with all the previous, even if I am not personally installing these parts on my vehicle. Furthermore, I understand and agree that this product should be installed by a trained professional that is familiar with both the vehicle as well as this product. Furthermore, I understand and agree that I and/or my chosen installer will follow the installation instructions carefully and dutifully test the vehicle post-installation in a safe and controlled environment to ensure proper operation.
- I understand and agree that by installing this product Unplugged Performance and all associated persons and entities as well as the vehicle manufacturer and all associated entities must be held harmless in the event of any suit, damages, or other legal action. Furthermore, I hereby release Unplugged Performance and any associated entities from any and all liability for any potential claim or claims.
If you do not agree with any of the above statements, you should return the product immediately. For more information please see our Terms and Conditions.Â
Identify the damaged curb guard. In case where a damage claim needs to be submitted, take a photo of the damaged curb guard installed on the wheel, prior to removal. Then repeat the same photo of the same wheel once the curb guard has been removed.
Using a pry tool, carefully pry the curb guard away from the wheel face by lifting the inner side of the ring.
Continue to work around the affected wheel and pry the adhesive away from the wheel surface.
As you make progress detaching the adhesive, be sure to pull the curb guard away from the vehicle. Continue to pull away at the curb guard until it has been completely removed from the vehicle.
Using a rubbing alcohol or equivalent nonresidue surface cleaner, clean the wheel surface until all residue has been removed from the wheel face. Note: Any and all paint protection materials between the adhesive bond and the painted surface of the wheel must be removed prior to curb guard installation. The presence of paint protection materials between the adhesive and the wheel face may compromise the integrity of the bond and will not be covered by our limited parts warranty.
Peel the backing tape edge away from the new curb guard to create a pull tab.
Place the curb guard over the wheel in the final installation location. Be sure to pull the backing tape lead end toward the center of the wheel with one hand, and press the curb guard against the wheel with the other hand until the backing tape has been completely removed. Apply pressure where the backing tape has been removed to ensure the adhesive bonds to the wheel surface properly.
Remove the protective film on the outside of the curb guard to complete installation.
Installation Complete!
Congratulations! You have completed your UP Road Warrior Curb Guard installation! Be sure to reinstall your undershield in the orientation it was removed. Torque the 10mm bolts to 12 ft/lbs.
